Manuals / Brands / Home Audio / Turntable / Fagor America / Home Audio / Turntable

Fagor America 20i-T, 20i-T B, 30i-T, 30i-T B - page 20

1 32

Download 32 pages, 621.25 Kb

(20/32) - DRO installation - Installation/Operation - 20i-T / 30i-T - V0612

To get into parameter editing

The dro displays must be on, reading mode and press the following keys:

The X axis display shows the word " COdE ". 060496

The displays of the DRO show PAR00.

Once in regular display mode, parameter PAR05 (scaling factor) may also

be recalled by pressing this keystroke sequence, so the work mode may be

changed without having to go through all the previous steps.

Note: Like PAR05, parameter PAR53 is directly accessible.

To enter a parameter

• Select axis.

• Press this key to save the displayed value.

• Press this key to cancel the modification.

Move through parameters

Press the [ENTER] key to go on to the next parameter or ---

Press this key to return to the previous one.

To quit the parameter editing mode:

Press this key.

To go to a particular parameter:

To go directly to a particular parameter without going through the previous

ones, (once in parameter editing mode) press this key sequence.

Then, select the axis affecting this parameter.

To recover the factory set default values for the installation parameters:

Once in parameter editing mode, displaying PAR00 on all the displays,

press this keystroke sequence. The dots of the first axis will light up.

CODE: 060496

[Value]

PAR Nr

Contents

Main INDEX 1 DRO description 1.1 Front panel Description of LED's and keys: ABS INCH 1.2 Turning the unit on and off Precautions 2 DRO operation 2.1 Display modes MM / INCH conversion Fine / coarse resolution Number of decimals 2.2 Incremental, absolute and with respect to Machine Reference Zero (ABS) (I) 2.2.1 Example In incremental mode: Note: In absolute mode: 2.3 Machine Reference selection and search 2.3.1 Home search sequence 2.4 Operation with tools 2.4.1 Tool Preset To preset a tool, just follow this procedure: Notes: 2.4.2 Deleting all tool offsets 2.5 Special operations 2.5.1 Scaling factor 2.5.2 To access the special functions (Hold, taper calculation, calculator) Options: Note: 2.5.5 Calculator 2.5.5.1 Operating with the calculator. 2.5.5.2 Recall and Reset modes RECALL mode PRESET mode Example Page 3.2 Rear panel 3.3 General technical characteristics 3.4 Connections 3.4.1 Connection of the feedback systems Characteristics of feedback inputs: X1, X2 and X3: 3.5 Easy setup 3.5.1 Accessing the "Easy Setup" mode 3.5.2 Operating mode. Ready Repeat Error Note: 3.5.3 Power and machine connection 3.6 Installation parameters Page 3.7 Parameters to configure axis position reading and display. P AR02 P AR03 Note: Page Page PA R 1 5 Import ant: Page 4 Appendix 4.1 UL seal 4.2 CE seal 4.2.1 Declaration of conformity SAFETY : ELECTROMAGNETIC COMPATIBILITY: 4.2.2 Safety conditions It is recommended to mount the DRO vertically, Safety symbols Symbols that may be carried on the product 4.2.3 Warranty terms W ARRANTY EXCLUDING CLAUSES SERVICE CONTRACTS 4.2.4 Material returning terms 4.3 Error codes 4.4 Maintenance Cleaning: Preventive Inspection FAGOR AUTOMATION S. COOP.