Manuals / Brands / Home Audio / Turntable / Fagor America / Home Audio / Turntable

Fagor America 20i-T, 20i-T B, 30i-T, 30i-T B 3.5 Easy setup

1 32

Download 32 pages, 621.25 Kb

(18/32) - DRO installation - Installation/Operation - 20i-T / 30i-T - V0612

3.5 Easy setup

The "Easy Setup" may be used to set up the feedback of the DRO and to

verify that the installation is correct and no feedback pulses are missed.

It sets up the encoder resolution and the kind of reference marks being used

as well as the positive counting (reading) direction.

3.5.1 Accessing the "Easy Setup" mode

Press [CLEAR] [OFF]

And, instead of entering the parameters accessing code, key in: 555

The axes displays will show “Setup” meaning that the feedback is not set up

yet.

3.5.2 Operating mode.

• Move the axis to the origin or zero point and press the axis key.

The display shows “START”.

• Move the axis in the positive direction all the way to the end of the travel so

the DRO can read as many reference marks as possible.

• Press [ENTER] to finish. The moving direction used will be assumed as the

positive direction.

Feedback connection. Connectors X1, X2 and X3

Pin Signal Function

1A

Input for feedback signals

2/A

3B

4/B

5I0

6 /I0

7Alarm

8/Alarm*

9 +5V Power supply to feedback devices

10 Not connected

11 0V Power supply to feedback devices

12, 13, 14 Not connected

15 Chassis Shield

CODE: 555

Contents

Main INDEX 1 DRO description 1.1 Front panel Description of LED's and keys: ABS INCH 1.2 Turning the unit on and off Precautions 2 DRO operation 2.1 Display modes MM / INCH conversion Fine / coarse resolution Number of decimals 2.2 Incremental, absolute and with respect to Machine Reference Zero (ABS) (I) 2.2.1 Example In incremental mode: Note: In absolute mode: 2.3 Machine Reference selection and search 2.3.1 Home search sequence 2.4 Operation with tools 2.4.1 Tool Preset To preset a tool, just follow this procedure: Notes: 2.4.2 Deleting all tool offsets 2.5 Special operations 2.5.1 Scaling factor 2.5.2 To access the special functions (Hold, taper calculation, calculator) Options: Note: 2.5.5 Calculator 2.5.5.1 Operating with the calculator. 2.5.5.2 Recall and Reset modes RECALL mode PRESET mode Example Page 3.2 Rear panel 3.3 General technical characteristics 3.4 Connections 3.4.1 Connection of the feedback systems Characteristics of feedback inputs: X1, X2 and X3: 3.5 Easy setup 3.5.1 Accessing the "Easy Setup" mode 3.5.2 Operating mode. Ready Repeat Error Note: 3.5.3 Power and machine connection 3.6 Installation parameters Page 3.7 Parameters to configure axis position reading and display. P AR02 P AR03 Note: Page Page PA R 1 5 Import ant: Page 4 Appendix 4.1 UL seal 4.2 CE seal 4.2.1 Declaration of conformity SAFETY : ELECTROMAGNETIC COMPATIBILITY: 4.2.2 Safety conditions It is recommended to mount the DRO vertically, Safety symbols Symbols that may be carried on the product 4.2.3 Warranty terms W ARRANTY EXCLUDING CLAUSES SERVICE CONTRACTS 4.2.4 Material returning terms 4.3 Error codes 4.4 Maintenance Cleaning: Preventive Inspection FAGOR AUTOMATION S. COOP.