3 LEVELING THE WASHING MACHINE AND CONNECTING TO THE POWER SYSTEM
LEVELING THE MACHINE
Important!
a We recommend seating and leveling the back first. Once these are well seated, firmly fix the metal locknut to the top section.
b Place the washing machine in the recess. A wet floor may help you drag the machine to its definitive location.
c Level and fix the front feet in the same manner as the back feet.
Be sure to keep the supplied wrench, you might need it again.
ELECTRICAL CONNECTION
Before making any electrical connections, refer to the data indicated on the specifications label attached to the machine’s door. Make sure that the voltage supplied to the plug’s base is the one indicated on the label.
Do not remove the specifications label, as the information on it is important.
Important!
The washing machine must be connected to a properly grounded power outlet.
The electrical installation, plug, outlet, fuses, or automatic switch and counter must be adjusted to the maximum power indicated on the specifications label.
Do not insert the machine’s plug into the outlet with wet or moist hands.
To remove the cable from the outlet, pull out the pin body, do not pull from the cable.
If the power supply cable is damaged, it must be replaced with a special cable or assembly supplied by the manufacturer or
On recessed washing machines, the outlet pin must be accessible after installation.
Connect to individual branch circuit.
10
