DOOR
There is a useful template with the assembly instructions.
hFit the corresponding template
iDrill, using a Ø 1,16” bit and screw in the supports (part which curves upwards) to the decorative door.
jTake the Decorative Door and slide the supports into the door slots. Pull up until touching the control panel making sure that it has been properly fixed down.
kOpen the dishwasher door slowly holding the decorative door and finally fix it with the screws taking care to align the panel with the door.
lIn the event that the door springs are not strong enough, compensate for this with the two additional screws supplied in the accessories bag.
mFit the panel on the kitchen appliance, tightening it until the desired measurement is obtained.
nFix the dishwasher to the worktop if it is made of wood. If the worktop is made of granite, fix the dishwasher to the adjoining furniture.
English
h | i |
j | k |
I M P O R T A N T
The maximum and minimum weight which is recommended for the decorative door to be fitted on the dishwashers is: Maximum 14 lb. Minimum: 6,5 lb.
l | m |
n | n |
I M P O R T A N T
A space of at least two millimetres must be left at the sides between the kitchen fittings or electrical appliances and the dishwasher.
9
