DISHWASHER
TROUBLESHOOTING
1TECHNICAL OR FUNCTIONAL PROBLEMS
When the dishwasher detects a dysfunction, it will display this with sounds or visual signals, depending on the model.
On the top edge of the dishwasher door there is a table identifying possible incidents.
(F1) Models with
display. In these models, the identification appears with the letter “F” followed by a number (from 1 to 9).
1 | Models without |
|
display. When there is a dysfunction, the dishwasher will emit a series of beeps, which stop for seven seconds and then sound again. It is possible to identify the type of dysfunction by counting the number of beeps (1 beep: Door open; 2 beeps: No water; etc.)
To stop the dishwasher emitting the beeps, press the Start / Pause button. Depending on the type of dysfunction, please contact the after sales department to inform them of your problem.
| MODEL | MODEL |
| WITHOUT | |
| WITH DISPLAY | |
| DISPLAY | |
|
| |
DYSFUNCTION |
| NO OF BEEPS |
|
|
|
Close the door | F1 | 1 |
No water entering | F2 | 2 |
No drainage | F3 | 3 |
Overflow | F4 | 4 |
Overteating | F5 | 5 |
No heating | F6 | 6 |
No temperature detection | F7 | 7 |
Lack of water pressure | F8 | 8 |
Does not distribute | F9 | 9 |
|
|
|
23
