4INTEGRATION
To install a
WORKTOP
aIf the worktop is made of wood, fit plastic protection over the worktop, which prevents the vapors affecting and damaging this area.
bFit the veneer to the front part of the dishwasher in order to fasten it to the piece of furniture.
LEGS – LEVELLING
cIn order to build it into a line of furniture with a single base, loosen the extra bases and remove them.
dBring it to the work top and raise it by turning the rear feet away from the front part leaving a space of around 3 mm with the worktop.
eTo finish positioning, adjust to desired height using the front feet.
PANELLING
fFrom the accessory bag supplied with the dishwasher, take the two panel adaptors, fit them by sliding them along the groove and fix them with screws also found in said bag.
gScrew the panel cover (supplied as an accessory) to the panel adaptors, adjusting to your desired height.
a | b |
c | d |
d | e |
f | g |
