1. The custom panel should be designed according to the measurements in Figure 3.
【Figure 3】
The custom panel should be designed and measured in accordance with the dimensions illustrated in Figure 3.
Units: Inches (Millimeters)
21.25" (540mm) | 0.59" (15mm) | |
22.36" (568mm) |
| |
| 1.5" (38mm) |
|
10" (254mm) | 9.84" (250mm) |
|
23.38" (594mm) |
| |
2.Install the hook on the custom panel and put the hook into the slot of the outer door of dishwasher (see figure 4a). After positioning the panel, attach the panel onto the outer door using screws and bolts (See figure 4b).
Hop hook
【Figure 4a】
Installation of custom panel
St4 countersunk head screw
Lower hook
13
