interior | 1/2/05 14:46 Página 19 |
14. OTHER POSSIBLE PROBLEMS AND THEIR SOLUTION
Faulty working order | Solution |
The screen remains blank when connecting the device, despite having batteries.
1.Ensure that the batteries are fitted according to the polarity and, if necessary, insert them correctly.
2.If the display data is unusual, reinsert the batteries or replace them.
No pressure despite the pump working.
•Check the armband tube connection and if it is necessary to connect it correctly.
The device frequently fails when measuring arterial pressure, or the values measured are too high/low.
1.Check the position of the tensometer.
2.Measure the arterial pressure again in a state of rest and calm, observing the details indicated in "Basic Rules".
The results are different with each measurement despite the correct working order of the device and it indicating normal values.
•Pay attention to the following "Additional information" and to the points listed in common "Error Messages", then repeat measurement.
The values measured with this device differ from those taken by the doctor.
•Record the daily evolution of the values and consult your doctor.
15. ADDITIONAL INFORMATION
The level of arterial pressure is subject to fluctuations, even in healthy people. It is important to bear in mind that comparable measurements always need the same conditions (of calm). If, despite observing all these factors, the fluctuations are higher than 15 mmHg and/or irregular beat tones are occasionally heard, consult your doctor.
Consult a specialized seller if you have problems with the device. Do not attempt to fix the device yourself.
Unauthorized opening of the instrument will leave any claim under the guarantee null and void.
20
