interior | 1/2/05 14:46 Página 15 |
4.PRODUCT DESCRIPTION
1.Connecting the armband
2.Liquid crystal display
3.O/I button and Memory
4.Batter compartment cover
5.Armband
6.Armband tube
7.AC/DC plug
5.INSERTING THE BATTERIES
Once the device has been unpacked, first insert the batteries. The battery compartment is located underneath the device.
a)Remove the battery compartment cover, as shown in the figure (Fig. 1).
b)Insert the 4 alkaline LR 06 (AAA) 2x1.5V type batteries, ensuring correct polarity (Fig. 2).
c)The 
, icon on the screen indicates that the batteries are used and need replacing (Fig. 3).
Warning:
•When the 
icon appears indicating that the batteries are used, the device blocks until they are replaced. All 4 batteries must be replaced.
•It is not advisable to use rechargeable batteries.
•If the device is not going to be used for a long period of time, remove the batteries from the compartment.
•
Used batteries should be deposited in special containers for the purpose.
Checking working order: Once the batteries are fitted in place, keep pressing the O/I button to check all the elements on the screen. If working correctly, all the segments should be displayed.
6. USE OF AC/DC POWER SUPPLY (not supplied)
The tensometer may be used with a power supply (6VDC/600 mA output with DIN connector). The supply used must comply with the appropriate legal requirements (EC marked on the label).
a)Insert the DIN connector into the socket located on the left side of the device (Fig. 4).
b)Plug in the transformer to an electrical 230 V socket.
c)Check for power by activating the O/I key.
Warning:
•When the device is connected to the transformer, the batteries are automatically turned off.
•In the event of the power supply being cut off while measuring, e.g., if the power supply transformer is disconnected, the device should be "restarted". To do so, pull out the power connector and reinsert once the power supply is
•In the event of any queries about the transformer, consult a specialized seller.
16
