3 F110 Web Interface
Note Many email servers block SMTP email by default. To use SMTP email with the F110, be sure the F110 IP address is added to the list of allowed SMTP relay hosts on the email server you are using for email.
Note After you make a field change, click on Accept Changes at the bottom of the screen, after verifying the settings are ok, click on the Save Settings tab located on the left hand column.
3.3.3 SNMP
The SNMP tab stores settings allowing the F110 to respond to SNMP Query requests from network monitoring applications. Enter the 'Community Name' to use for accessing the SNMP data via SNMP Query for the F110 sensors. If the SNMP feature of the F110 is used, F110 MIB files are available for download on the Documentation/Files section of the F110 webpage at www.rletech.com, or by contacting RLE via support@rletech.com.
The F110 can also send SNMP Traps in response to alerts. Enter up to three (3) IP addresses on the SNMP tab and F110 will send SNMP Traps to these systems for processing by network monitoring applications.
Figure 3.5 SNMP Settings
Note After you make a field change, click on Accept Changes at the bottom of the screen, after verifying the settings are ok, click on the Save Settings tab located on the left hand column.
www.rletech.com | 23 | 970.484.6510 |
