FARGO electronic M30e manual Following the Resin Heat Back Procedure

Following the Resin Heat Back Procedure

Command Line	CUPS option	Description
Usage
ResinHeatBack =	Resin Heat Back (K) = 0	1. Adjust the Resin Heat Back value
0		higher to use more heat and
<-100 to 100>		increase the transfer of resin to a
		card.
		2. Adjust the Resin Heat Back value
		lower to reduce the amount of heat
		used and reduce the transfer of
		resin to the card.
Following the Overlay Heat Procedure

Command Line	CUPS option	Description
Usage
OverlayHeat = 0	Overlay Heat (O) = 0	1. Adjust the Overlay Heat value
<-50 to 50>		higher to use more heat and
		increase the transfer of overlay to a
		card.
		2. Adjust the Overlay Heat value lower
		to reduce the amount of heat used
		and reduce the transfer of overlay to
		the card.

Fargo M30e CUPS Driver User Guide (Rev. 1.0.3) 30