TRIM CALIBRATION
Press 
to begin Trim Calibration, then follow the
Step 1: Set your engine to its full down position, then press 
.
Step 2: Set your engine to the top of its trim range (prop still in water),
then press 
.
Step 3: Set your engine to the top of its trailer /
.
Once step 3 is completed, the screen will display “TRIM CALIBRATION
COMPLETE” and the 
icon on the Save Changes bar will automatically highlight. If ALL steps were followed correctly, press
to save. 
will appear to confirm that the changes have been saved. If ALL steps were not followed correctly, use the
navigation pad to highlight 
and press 
. 
will appear to confirm that the changes have not been saved.
The Antares will automatically return to the previous screen.
25
