![Remise en place du dessus du boîtier](/images/new-backgrounds/33978/339789x1.webp)
Remise en place du dessus du boîtier
Remettez le dessus du boîti- er en le positionnant au- dessus de l'appareil (figure 9).
Faites glisser doucement le dessus vers l'avant, jusqu'à ce qu'il se retrouve bien logé (figure 10).
Figure 9
The Fan Only switch is provided to assist in the dry cycle after cleaning the cell.
NOTE: You may notice an |
|
|
occasional, sharp snapping sound |
|
|
coming from your unit. This is a |
|
|
|
| |
normal occurrence called |
|
|
“arcing” and results as large |
|
|
particles of dust are collected in |
|
|
the |
| Figure 3 |
Should prolonged or continuous |
|
|
arcing occur, the ionizing- |
|
|
collecting cell should be |
|
|
thoroughly cleaned and dried |
|
|
(See “To Clean Cell”). |
|
|
|
|
|
ENGLISH
REMARQUE : La décol- oration des plaques en aluminium de la cellule collectrice est normale avec l'utilisation, même après le nettoyage.
Faites fonctionner l'appareil
Care of Cabinet
You should treat the cabinet of your air purifier as you would any piece of fine furniture. A soft damp cloth will keep it clean and attractive for many years.
To Remove Cell for Cleaning
CAUTION:
Before cleaning or servicing this unit, it is recommended that the unit be disconnected from any electrical supply outlet.
àla position Fan Only (Ventilateur ) pendant un minimum d'une heure, pour vous assurer que la cellule est complètement sèche.
REMARQUE : Un bruit sec, d'arc électrique, intermittent, est normal lors de l'utilisation de l'appareil, immédiate- ment après le nettoyage de la cellule, et ce bruit devrait s'arrêter après quelques minutes.
Figure 10
Figure 11
Turn off the air purifier and unplug it from the electrical power source.
Remove cabinet top by sliding cabinet top slowly toward front grille until unlocked. Cabinet top can now be lifted up and off (Figure 4).
Figure 4
6 | 3 |