Fedders CH24ACD1VF Product Specifications, Physical Data, Model Size, Performance Data, Fan Data

Product Specifications

PHYSICAL DATA

MODEL SIZE	18	24	30	36	42	48	60
PERFORMANCE DATA
NOMINAL CAPACITY (BTUH)	18,000	24,000	30,000	36,000	42,000	48,000	60,000
FAN DATA
FAN MOTOR TYPE	PSC	PSC	PSC	PSC	PSC	PSC	PSC
HP	1/5	1/3	1/3	1/3	1/3	1/3	1/3
DIAMETER	18"	22"	22"	22"	22"	22"	24"
BLADE	3	3	3	3	3	3	3
RPM	1,050	1,050	1,050	1,050	1,050	1,050	950
CFM	1,800	3,400	3,400	3,400	3,400	3,400	4,000
OUTDOOR COIL
TYPE		Enhanced Aluminum Plate Fin / Rifled Copper Tube
COIL FACE AREA (ft2)	12.2	18.2	18.2	18.2	18.2	18.2	22.2
O.D.	3/8"	7mm	7mm	7mm	7mm	7mm	7mm
FPI / ROWS	18 -1	18-2	18-2	18-2	18-3	18-3	18-3
ELECTRICAL DATA (208/230 – 1-60, VOLTAGE RANGE 197V - 253V)
MINIMUM CIRCUIT AMPACITY - MCA (amps) 2	13.5	16.0	18.8	20.5	24.8	27.3	38.5
MAXIMUM OVERCURRENT PROTECTIVE DEVICE- MOCP(amps)3	20	25	30	35	40	45	50
COMPRESSOR RLA (Rated Load Amps)	10.0	11.4	13.6	15	18.4	20.9	29.4
COMPRESSOR LRA (Locked Rotor Amps)	41	56	67	73	95	109	134
FAN MOTOR FLA (Full Load Amps)	1.4	1.8	1.8	1.8	1.8	1.8	1.9
REFRIGERANT CONNECTIONS
LIQUID LINE CONNECTION SIZE (In. OD)	3/8	3/8	3/8	3/8	3/8	3/8	3/8
SUCTION LINE CONNECTION SIZE (In. OD)	3/4	3/4	7/8	7/8	7/8	7/8	7/8
RECOMMENDED LINE SET LIQUID TUBE DIAMETER (In. OD)	3/8	3/8	3/8	3/8	3/8	3/8	3/8
RECOMMENDED LINE SET SUCTION DIAMETER (In. OD)	3/4	3/4	7/8	7/8	7/8	1 1/8	1 1/8
FACTORY CHARGE - OZ.	103	164	154	164	207	233	233*

NOTE: Control circuit is 24V on all units and requires external power source. Copper wire must be used from service disconnect to unit. ALL motors/compressors contain internal overload protection.

1.Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.

2.Time delay fuses may be used in place of HACR circuit breaker.

*Unit uses R-410A refrigerant.

2

Specifications subject to change without notice.