Fellowes 99Ms manual Capabilities, IMPORTANT SAFETY INSTRUCTIONS - Read Before Using, Basic Set Up

A.

B.

C.

D.

E.

F.

G.

KEY

A. SafeSense® Technology			G. Control Panel and LEDs
B. Paper entry				1.		Overheat (red)
C. See safety instructions			2.			Bin open (red)
D. Pullout bin			3.			Bin full (red)
E. Casters					4.	Remove Paper (red)
F. Disconnect power switch					5. SafeSense® indicator (yellow)
1.		OFF			6. Reverse
	2.	ON			7. ON/OFF (blue)
					8. Forward

ENGLISH

Model 99Ms

CAPABILITIES

Will shred: Paper, credit cards and staples

Will not shred: Adhesive labels, continous form paper, transparencies, newspaper, cardboard, paper clips, CD/DVDs, laminates, file folders, X-rays or plastic other than noted above

Paper shred size:
Micro-Cut	2 x 14mm

Maximum:
Sheets per pass	12*
Paper entry width	9 in. (230mm)

*8.5 in. x11 in., 20lb., (75g) paper at 120V/60 Hz, 6.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Maximum recommended daily usage rates: 1000 sheets per day,

50 credit cards. 12 sheets per pass to avoid jams.

Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

t 0QFSBUJPO NBJOUFOBODF BOE TFSWJDF SFRVJSFNFOUT BSF DPWFSFE JO UIF JOTUSVDUJPO		t	5IJT TISFEEFS IBT B %JTDPOOFDU 1PXFS 4XJUDI ' UIBU NVTU CF JO UIF 0/ (	)
manual. Read the entire instruction manual before operating shredders.			position to operate shredder. In case of emergency, move switch to OFF (O)
t ,FFQ BXBZ GSPN DIJMESFO BOE QFUT ,FFQ IBOET BXBZ GSPN QBQFS FOUSZ "MXBZT TFU			position. This action will stop shredder immediately.
to off or unplug when not in use.		t	"WPJE UPVDIJOH FYQPTFE DVUUJOH CMBEFT VOEFS TISFEEFS IFBE
t ,FFQ GPSFJHO PCKFDUT o HMPWFT KFXFMSZ DMPUIJOH IBJS FUD o BXBZ GSPN TISFEEFS		t	4ISFEEFS NVTU CF QMVHHFE JOUP B QSPQFSMZ HSPVOEFE XBMM PVUMFU PS TPDLFU PG UIF
openings. If object enters top opening, switch to Reverse (	) to back out object.		voltage and amperage designated on the label. The grounded outlet or socket
t /FWFS VTF BFSPTPM QSPEVDUT QFUSPMFVN CBTFE MVCSJDBOUT PS PUIFS GMBNNBCMF			must be installed near the equipment and easily accessible. Energy converters,
			transformers, or extension cords should not be used with this product.
products on or near shredder. Do not use canned air on shredder.
t %P OPU VTF JG EBNBHFE PS EFGFDUJWF %P OPU EJTBTTFNCMF TISFEEFS		t '*3& )";"3% o %P /05 TISFE HSFFUJOH DBSET XJUI TPVOE DIJQT PS CBUUFSJFT
Do not place near or over heat source or water.		t	'PS JOEPPS VTF POMZ
		t	6OQMVH TISFEEFS CFGPSF DMFBOJOH PS TFSWJDJOH

BASIC SET UP

CASTER INSTALLATION

1 2 3 4 5

2