BASIC SHREDDING OPERATION
Continuous operation:
NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond
PAPER/CARD |
|
|
|
1 | 2 | 3 | 4 |
|
| or |
|
Press | Feed into paper entry | Feed into center of | Set to Off |
| and release | entry and release |
|
Advanced product features
SAFESENSE® TECHNOLOGY OPERATION
Stops shredding immediately when hands touch the paper opening.
1 | 2 | 3 |
Turn the shredder ON ( ) to activate SafeSense®
Touch test area and | SafeSense® is active |
look for the SafeSense® | and working properly |
indicator to illuminate |
|
BASIC PRODUCT MAINTENANCE
OILING SHREDDER
All
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
12 3
Set to Off | *Apply oil across entry | Press and hold Reverse |
|
| (R) |
*Only use a
TROUBLESHOOTING
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about the continuous operation and recovery time for this shredder.
PAPER JAM |
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
Press and hold Reverse | Alternate slowly back and forth | Set to Off | Gently pull uncut paper | Press and hold |
(R) |
| and unplug | from paper entry. Plug in. | Reverse (R) |
3