12
b) Edge trimming with bearing guide
10-1
Use routing tools with a bearing guide in the machine when edge trimming with the large surface router table. The machine is then guided in such a way that the bearing guide rolls off the workpiece.
When trimming edges, always use the under- table extractor adapter
c)Edge trimming with sensor and router table for edge veneer
1,5°
When edge trimming with the router table for edge veneer (only in SET scope of delivery), fit the sensor
Aluminium processing
Risk of accident - always perform the following safety measures when routing aluminium:
fAdd a
fConnect the machine to a suitable dust extractor.
fRemove dust deposits from the motor hous- ing on a regular basis.
fWear protective goggles.
Service and maintenance
Any maintenance or repair work that requires opening of the motor or gear housing should only be carried out by an authorised Customer Service Centre (name supplied by your dealer)! Maintenance or repair work carried out by an unauthorised person can lead to the wrong connection of the power leads or other com- ponents, which in turn can lead to accidents with serious consequences.
To prevent accidents, always remove the plug from the power supply socket before carrying out any mainte- nance or repair work on the machine! Do not use compressed air to clean the electri- cal tool! Do not try to clean parts inside the machine in this way, as you could let foreign objects in through the openings of the ma- chine housing.
Certain cleaning agents and solvents are harmful to plastic parts.
Some of these are: gasoline, carbonyl chlo- ride, cleaning solutions containing chlorine, ammonia and household cleaners containing ammonia.
fTo assure the circulation of air, the cool air vents in the motor housing must always be kept clear and clean.
fThis unit is fitted with special, automati- cally disconnecting carbon brushes. If these become worn, the current is automatically switched off and the unit shuts down. In this case, take the unit to an authorised Customer Service Centre and have the carbon brushes changed.
Accessories, tools
For safety reasons, only use original Festool accessories and tools!
The accessory and tool order number can be found in the Festool catalogue or on the In- ternet under
Systainer
Many Festool products are shipped in a unique system container, called "Systainer". This pro- vides protection and storage for the tool and accessories. The Systainers are stackable and can be interlocked together. They also can be interlocked atop Festool CT dust extractors.
