6
Table of contents
Safety rules
Technical data
Symbols
Scope of delivery
Intended use
Electrical connection
Switching the machine on and off
Tool settings Electronic control Changing the router table Changing the routing tool Changing the clamping collet Adjusting the routing depth Dust extraction
Working with the machine Machine guidance methods Aluminium processing
Service and maintenance Accessories, tools Warranty
| 2) Electrical safety | |
| a) Power tool plugs must match the out- | |
6 | let. Never modify the plug in any way. Do | |
8 | not use any adapter plugs with earthed | |
(grounded) power tools. Unmodified plugs | ||
8 | ||
and matching outlets will reduce risk of elec- | ||
8 | ||
tric shock. | ||
8 | b) Avoid body contact with earthed or | |
8 | grounded surfaces such as pipes, radia- | |
9 | tors, ranges and refrigerators. There is an | |
9 | increased risk of electric shock if your body is | |
earthed or grounded. | ||
9 | ||
c) Do not expose power tools to rain or | ||
9 | ||
wet conditions. Water entering a power tool | ||
10 | ||
will increase the risk of electric shock. | ||
10 | ||
d) Do not abuse the cord. Never use the | ||
11 | ||
cord for carrying, pulling or unplugging | ||
11 | ||
the power tool. Keep cord away from | ||
11 | heat, oil, sharp edges or moving parts. | |
11 | Damaged or entangled cords increase the risk | |
12 | of electric shock. | |
|
12 | e) When operating a power tool outdoors, | |
use an extension cord suitable for out- | ||
12 | ||
door use. Use of a cord suitable for outdoor | ||
|
13use reduces the risk of electric shock.
Safety rules
General safety rules
Read and understand all in- structions. Failure to follow all instruc- tions listed below may result in electric shock, fire and/or serious personal in- jury.
SAVE THESE INSTRUCTIONS
1)Work area safety
a)Keep work area clean and well lit. Clut- tered and dark areas invite accidents.
b)Do not operate power tools in explo- sive atmospheres, such as in the pres- ence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
3)Personal safety
a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b)Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
c)Avoid accidental starting. Ensure the switch is in the off position before plug- ging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e)Do not overreach. Keep proper foot- ing and balance at all times. This enables better control of the power tool in unexpected situations.
