Festool PI571579, PN571579 Sanding close to edges, Dust extraction, Operation, Risk of injury

7-1

1

Sanding close to edges

The detachable brush segment allows you to re- duce the distance between the wall/ceiling and the side of the sanding pad.

f Press and hold the knob [7-1]. f Remove the brush segment [7-2].

There is a retainer in the lid of the SYSTAINER for storing the brush segment.

fHook in the brush segment at the opposite end to the knob [7-1], swivel towards the sanding head and engage into position.

7	7-2
		2
8	8-1	8-2

1

2

8-48-3

Dust extraction

CAUTION

Breathing in dust can damage the respiratory passage!

fAlways connect the machine to a dust extrac- tor.

fWhen performing work that generates dust, always wear a dust mask.

A Festool dust extractor with an extractor hose diameter of 27 mm or 36 mm (recommended due to the improved suction power) can be connected to the extractor connector [8-2].

The special extraction hose and special suction sleeve [8-1] (available as an accessory) ensure permanent attachment and protect against kinking.

Use the dust extractor CT 36 E AC-LHS on large surfaces because this extractor guarantees the permanent suction power required.

f Press the green button [8-4] to open the me- chanical lock [8-3].

fAttach the extraction hose on the dust extractor to the outlet spigot [8-2].

fSwivel the mechanical lock [8-3] upwards until it engages.

Operation

WARNING

Risk of injury

fDo not hold the machine by the head.

fHold the machine with both hands.

fMake sure that all clamping levers are closed before operating the machine.

13