Content |
|
Symbols | 6 |
Safety instructions | 6 |
Technical data | 9 |
Functional description | 9 |
Intended use | 10 |
Commissioning | 10 |
Extension cord | 10 |
Machine settings | 10 |
Fitting the PLANEX | 10 |
Electronics | 11 |
Changing sanding pads | 11 |
Affixing abrasives | 12 |
Adjusting the internal/external extraction | 12 |
Adjusting the suction power | 12 |
Sanding close to edges | 13 |
Dust extraction | 13 |
Operation | 13 |
Service and maintenance | 15 |
Accessories, tools | 15 |
Disposal | 16 |
Warranty | 16 |
Troubleshooting | 16 |
Symbols |
|
Warning of general danger |
|
Risk of electric shock |
|
Wear a dust mask! |
|
Wear ear protection.
Clean the air vent slits and dust filter
Read the Operating Instructions/Notes!
VVolts
AAmperes
Hz Hertz
WWatt
~Alternating current
n0 | No load speed |
| Class II Construction |
rpm |
|
ØDiameter Tip, advice
Safety instructions
General safety instructions
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/ or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
1 WORK AREA SAFETY
a)Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b)Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c)Keep children and bystanders away while op- erating a power tool. Distractions can cause you to lose control.
2 ELECTRICAL SAFETY
a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b)Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of elec- tric shock if your body is earthed or grounded.
c)Do not expose power tools to rain or wet condi- tions. Water entering a power tool will increase the risk of electric shock.
d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords in- crease the risk of electric shock.
e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
6
