Festool PN571579, PI571579, PD571579 Service and maintenance, Accessories, tools, Systainer

The machine has an internal malfunction. Have the machine inspected by an authorised service workshop.

Service and maintenance

WARNING

Risk of accident, electric shock

f Always pull the plug out of the socket before performing any type of work on the machine.

f All maintenance or repair work requiring the motor housing to be opened must be carried out only by an authorized service workshop. Maintenance or repair work carried out by an unauthorized person can lead to the incorrect connection of the wiring or other components, which in turn can lead to accidents with seri- ous consequences.

fChecktheplugandthecableregularlyandshould either become damaged, have them replaced by an authorised after-sales service workshop.

fTo ensure constant air circulation, always keep the air vent slits in the motor housing clean and free of blockages. Read the instructions on vi- sual warning signals in chapter “Operation".

fClean the contact slide regularly. Do not use hard objects.

The machine is equipped with self-disconnecting special carbon brushes. If they are worn, power is interrupted automatically and the machine comes to a standstill.

Tighten the clamping levers if they no longer capable of retaining the extension pipe prop- erly:

f Turn the screws on the clamping levers [3-1] and [3-2] approx. 1/8 of a turn.

Accessories, tools

For safety reasons, only use origi- nal Festool accessories and tools!

The accessory and tool order number can be found in the Festool catalog or on the Internet under www.festoolusa.com.

connect

T-loc

connect

Systainer

Many Festool products are shipped in a unique system container, called “Systainer”.

This provides protection and storage for the tool and accessories. The Systainers are stackable and can be connected together. They also can be conntected atop Festool CT dust extractors.

To open the Systainer:

– Turn the T-loc [10-1] to the position .

To lock the Systainer:

– Turn the T-loc [10-1] to the position .

To connect two Systainers:

–Place one Systainer on the top of the other (Fig. 10A).

–Turn the T-loc [10-1] to the position or (Fig. 10B).

The Systainers are connected and locked.

A new generation Systainer is connectable on top of a previous generation Systainer by the four latches of the previous Systainer.

15