HK 82 RF
HK 82 RG
HK 82 RW
|
| 0. |
| 0 | 2 |
| 0 mm | |
P |
| |
|
| |
10 |
|
|
|
| 11.3 |
11.1 |
|
|
|
| 11.2 |
12.3
12.2
12.1
Rustic planer heads
(accessories)
The planer can also be used to create rustic surfaces. Three rustic planer heads are avail- able for this purpose:
•HK 82 RG: creates a surface with a coarse struc- ture.
•HK 82 RG: creates a surface with a fine struc- ture.
•HK 82 RW: creates an uneven, wavy surface.
The blades on the rustic planing head (HK 82 RF, HK 82 RG, HK 82 RW) protrude approx.
1.5mm over the planer foot. When using rustic planing heads on the planer, set the cutting depth to 0 mm. Otherwise there is a risk that the blades on the head will cut into the planer foot and destroy the planer.
The cutting depth limiter (11.2) prevents the cutting depth from increasing inadvertently while planing work is performed.
Always attach the cutting depth limiter to the planer before working with a rustic planing head:
-Set the cutting depth on the planer to 0 mm,
-Attach the cutting depth limiter by inserting the rotary knob (11.1) through the limiter and into the threaded hole (11.3).
Systainer
Many Festool products are shipped in a unique system container, called "Systainer". This provides protection and storage for the tool and accessories. The Systainers are stackable and can be interlocked together. They also can be interlocked atop Festool CT dust extractors.
-Place one systainer on top of the other.
-Release all four latches on the lower systainer by pulling back at their top edges (12.1).
-Slide all four latches upward (12.2).
-Snap all four latches back to their flat position (12.3) so they engage the stacking tabs of the upper systainer.
Maintenance and service
Always disconnect the mains plug from the socket before carrying out any main- tenance work on the machine.
Any maintenance and repair work requiring an opening of the motor housing
11
