Page 6 of 16 |
4.Configuring the FieldServer as a X30 Profibus DP Master Client
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” sample files provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer to communicate with up to 125 Profibus DP Slaves.
4.1. | FieldServer |
|
|
|
|
| |
Section Title |
|
| |
FieldServer |
|
| |
Column Title | Function | Legal Values | |
System_Station_Address | Profibus address of the X30 DP Master | ||
4.2.Data Arrays/Descriptors
The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for X30 Profibus DP Master communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the destination device addresses need to be declared in the “Client Side Nodes” section, and the data required from the servers needs to be mapped in the “Client Side Map Descriptors” section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.
Section Title |
|
| |
Data_Arrays |
|
| |
Column Title | Function | Legal Values | |
Data_Array_Name | Provide name for Data Array | Up to 15 alphanumeric | |
characters | |||
|
| ||
|
| Float, Bit, UInt16, SInt16, | |
Data_Array_Format | Provide data format. Each Data Array | Packed_Bit, Byte, | |
| can only take on one format. | Packed_Byte, | |
|
| Swapped_Byte | |
| Number of Data Objects. Must be |
| |
Data_Array_Length | larger than the data storage area | ||
required by the Map Descriptors for | |||
|
| ||
| the data being placed in this array. |
| |
|
|
|
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
