| Page 8 of 26 |
4.2.Client Side Connection Descriptions
Section Title |
|
|
|
|
|
Connections |
|
|
|
|
|
Column Title |
| Function |
|
| Legal Values |
| Specify which port the device |
| |||
Port | is | connected | to | the | |
| FieldServer |
|
|
| |
Protocol | Specify protocol used |
| MetOne | ||
Baud* | Specify baud rate |
|
| 9600 (Vendor limitation). | |
Parity* | Specify parity |
|
| None (Vendor limitation) | |
Data_Bits* | Specify data bits |
|
| 8 (Vendor limitation) | |
Stop_Bits* | Specify stop bits |
|
| 1 (Vendor limitation) | |
Handshaking* | Specify | hardware | RTS, RTS/CTS, None | ||
| handshaking |
|
|
| |
Poll_Delay* | Time between internal polls |
| |||
Example
//Client Side Connections
Connections
Port, | Protocol, | Baud, | Parity, | Handshaking, | Poll_Delay |
P8, | MetOne, | 9600, | None, | None, | 0.100s |
4.3.Client Side Node Descriptors
| Section Title |
|
|
|
|
|
| Nodes |
|
|
|
|
|
| Column Title | Function | Legal Values |
| ||
| Node_Name | Provide name for node | Up to 32 alphanumeric characters |
| ||
| Node_ID | The ‘Device’ Number |
|
| ||
| Protocol | Specify protocol used | MetOne. |
|
| |
| Connection | Specify which port the device is |
|
| ||
|
| connected to the FieldServer |
|
|
| |
|
| Identifies for the driver the family | “237 Family” |
|
| |
|
| “2408” or “Manifold” |
| |||
| PLC_Type | of Particle | Counters/Manifolds | “4800” |
|
|
|
| connected to. |
| “HF CNC” |
|
|
|
|
|
|
|
| |
| Example |
|
|
|
|
|
|
|
|
|
|
|
|
| Nodes |
|
|
|
|
|
| Node_Name, | Node_ID, | Protocol, | PLC_Type, | Connection |
|
| PLC 1, | 1, | MetOne, | 237 Family, | P8 |
|
1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: 408
