FS-8700-40 SBT FSI Driver Manual

FS-8700-40 SBT FSI Driver Manual	Page 13 of 29

Passive Map Descriptors must be added for each event per panel to be monitored:

// Client Side Map Descriptors
Map_Descriptors
Map_Descriptor_Name	,Data_Array_Name	,Data_Array_Offset	,Function	,Node_Name	,Block_Number	,Length	,Msg_Type
CD_Fire1	,Fire	,0	,Passive	,Panel1	,1	,1024	,Fire
CD_Fire_Ack1	,Fire_Ack	,0	,Passive	,Panel1	,1	,1024	,Fire_Ack
CD_Trouble1	,Trouble	,0	,Passive	,Panel1	,1	,1024	,Trouble
CD_Trouble_Ack1	,Trouble_Ack	,0	,Passive	,Panel1	,1	,1024	,Trouble_Ack
CD_Super1	,Super	,0	,Passive	,Panel1	,1	,1024	,Super
CD_Super_Ack1	,Super_Ack	,0	,Passive	,Panel1	,1	,1024	,Super_Ack
CD_Secur1	,Secur	,0	,Passive	,Panel1	,1	,1024	,Secur
CD_Secur_Ack1	,Secur_Ack	,0	,Passive	,Panel1	,1	,1024	,Secur_Ack
CD_Status1	,Status	,0	,Passive	,Panel1	,1	,1024	,Status
CD_Test1	,Test	,0	,Passive	,Panel1	,1	,1024	,Test
CD_Audible1	,Audible	,0	,Passive	,Panel1	,-	,1	,Audible
CD_Reset1	,Reset	,0	,Passive	,Panel1	,-	,1	,Reset
CD – Client Descriptor

Node Name specifies the panel number for which events will be stored.

Notes:

Block Number specifies the starting module number under which points are mapped.

Length specifies the number of points. There are 256 points per module. A length of 1024 holds points for 4 modules.

1All passive Map Descriptors are optional. Specific Map Descriptors may be defined for particular events to be monitored as per the Msg_Type. Should events happen for which no Map Descriptors are defined, error messages will occur on the FieldServer. It may therefore be useful to add dummy Map Descriptors especially for ack responses to prevent nuisance error messages.

2Passive Map Descriptors with Node_Name the same as the poller Map Descriptor will only be able to store events from a panel with the same Node_ID e.g. Node_ID of 1 will only store events from panel 1. To store events from panel 2, it is necessary to add passive Map Descriptors with Node ID of 2 etc. Do not add poller Map Descriptors for other panels.

3Important Note about first alarm point and Data Array Offsets

Most SBT-FSI panels have device point numbers starting at one instead of zero. The FieldServer MXL driver reserves Data Array offset zero for points with device numbers of zero although they are currently not used. Triggering the first alarm point on a MXL panel will thus result in a point status change at Data_Array_Offset of one instead of zero.

FieldServer Technologies 1991 Tarob Court Milpitas, California	95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509	1970 email: support@fieldserver.com

FS-8700-40 specifications

The FieldServer FS-8700-40 is an advanced protocol gateway that plays an essential role in the integration of diverse building management systems and industrial automation environments. Renowned for its robustness and versatility, the FS-8700-40 is engineered to facilitate seamless communication between a variety of devices and networks, which enhances operational efficiency and flexibility.

One of the standout features of the FS-8700-40 is its support for multiple protocols. The device is compatible with a wide range of protocols prevalent in the industry, including BACnet, Modbus, LonWorks, and many others. This multi-protocol capability allows users to connect devices from different manufacturers without the need for extensive customization or the installation of multiple gateways, thus simplifying system architecture and reducing costs.

The FS-8700-40 is equipped with a powerful microprocessor that ensures high performance and reliability. Its processing capabilities enable it to handle complex data exchanges and logic operations, making it suitable for both small scale and large scale applications. The device also features an extensive memory capacity, aiding in the storage and retrieval of large datasets necessary for sophisticated control strategies and reporting functionalities.

Another prominent characteristic of the FS-8700-40 is its user-friendly interface. The device comes with a web-based graphical user interface (GUI) that allows for easy configuration and monitoring. Users can easily set up and modify communication parameters, visualize data trends, and implement system changes in real time, all from an accessible online portal. This enhances user experience and decreases the time needed for system maintenance and updates.

Security is also a critical consideration in the design of the FS-8700-40. The device incorporates advanced security measures to protect sensitive data and ensure secure communication between connected devices. This includes features such as user authentication, data encryption, and secure sockets layer (SSL) support, which fortify the overall integrity of the system.

In addition to its technological prowess, the FS-8700-40 is designed to be highly durable and reliable in various operational conditions. With features like temperature resistance and surge protection, it boasts an extended lifespan and requires minimal maintenance, making it a cost-effective solution for users.

In summary, the FieldServer FS-8700-40 stands out due to its multi-protocol support, high processing capabilities, user-friendly interface, robust security, and durability. Its ability to facilitate communication between heterogeneous systems makes it an indispensable tool for businesses looking to optimize their operational efficiency and future-proof their infrastructure.

FieldServer instruction manual FS-8700-40 SBT FSI Driver Manual

Models: FS-8700-40

FS-8700-40 SBT FSI Driver Manual

FS-8700-40 specifications