| Page 30 of 51 |
|
|
A.7.2. Internal Indications reported in Responses
The Internal Indications (IIN) field is a
A.7.3. Server_II_Array
This parameter only applies to Server/responding nodes.
If specified the driver validates that the Data Array exists. If it doesn’t then Error 78 is printed.
The driver uses the 1st two elements to form the Internal Indications bytes of all normal responses (responses where the driver is able to respond to the poll). The driver does not modify these bytes when building the response but sends the values exactly as found in the Data Array.
If a poll for unknown and/or unsupported objects/devices is received, the driver builds the internal indications bytes itself. They cannot be controlled using this parameter.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com