FieldServer FS-8700-59 Supplied by FieldServer Technologies for this driver, Provided by user

FS-8700-59 Canatal Sachnet Driver Manual

1.Canatal Satchnet Protocol Driver Description

The Canatal Satchnet Protocol Driver allows the FieldServer to transfer data to and from devices over either RS-232 or RS-485 using Canatal Satchnet Protocol Driver protocol. The FieldServer can emulate either a Server or Client.

This driver provides support for the Canatal Corporation implementation of the “Satchwell Network” protocol.

The Canatal Satchnet Protocol Driver can act as a Master.

∙Any Satchnet device on any serial port (P1-P8, R1 & R2 on the FS-B40 Series, serial port on the FS-B20 series) can be polled.

∙Data from Series 2, 4, 5, 6, 9 devices can be polled.

∙Data from any 'Table' can be read.

∙Data in 'Tables' with write permission can be written by the driver.

∙The driver can read/write Bit, Byte, Swapped Integer, Word, BCD and Float Data.

The Canatal Satchnet Protocol Driver can act as a (passive) server.

∙The driver can be polled by a Satchnet Master and return data from the FieldServer's data arrays.

∙The driver can emulate Series 2,4,5,6,9 devices.

∙All 'Tables' can be read / written.

2.Hardware/Software

2.1Supplied by FieldServer Technologies for this driver

RS-485 connection adapter

Driver Manual.

2.2 Provided by user

Canatal Device

UTP or similar cable with RJ11 adapter.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com

Page 1