FieldServer FS-8700-59 instruction manual Troubleshooting

Models: FS-8700-59

1 17
Download 17 pages 12.43 Kb
Page 16
Image 16

FS-8700-59 Canatal Sachnet

Driver Manual

The Data formats are used internally in the driver but they do indicate to the user the type of data array that should be used for storage in the FieldServer.

Data Type

Suitable Data Array Types

CANA_BCD_CODED

BYTE,UINT16,UINT32,FLOAT

CANA_BYTE

BYTE,UINT16,UINT32,FLOAT

CANA_SWAP_INT

SINT16, SINT32, UINT16,UINT32,FLOAT

CANA_BCD_4

BYTE

CANA_WORD

UINT16,UINT32,FLOAT

CANA_FLOAT

FLOAT

6.2 Troubleshooting

The following messages are produced by the driver. Those marked FYI are for the user's information only and do not require any corrective action. Those marked Error require some action from the user.

CANA:#1

FYI. Station illegal -Forcing from %d to 59

 

Valid station numbers are 1-63.

CANA:#2

Error. Series & table numbers are rqd. Correct MapDesc=<%s>

 

The series and table parameters cana_series and cana_table must be specified in

 

the map descriptors.

CANA:#3

Error. Illegal Series Number. Correct MapDesc=<%s>

 

The series number specified cannot be processed by this driver. Read the vendor

 

documentation and correct the CSV file.

CANA:#4

Error. Illegal Table Number(%d). Correct MapDesc=<%s>

 

All Canatal equipment series do not have the same number of tables. Read the

 

vendor documentation and correct the CSV file.

CANA: #5

Error. Series & table numbers are rqd. Empty Table. Correct MapDesc=<%s>

 

The series & table combination specified are not valid. Read the vendor

 

documentation and correct the CSV file.

CANA:#6

Error. Start address is beyond end of table. MapDesc=<%s>

 

The address is the equivalent term to offset in the Vendor literature. Different

 

tables have different lengths. The lengths may also be different based on the

 

series number of the equipment. Read the vendor documentation and correct the

 

CSV file.

CANA:#7

FYI. Requested too many elements from table. MapDesc=<%s>

 

Changed request from %u to %u

 

The driver has truncated you data_length so that it does not read/write beyond the

 

end of a table.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com

Page 14

Page 16
Image 16
FieldServer FS-8700-59 instruction manual Troubleshooting