FieldServer FS-8700-72 3. Hardware Connections ,

FS-8700-72 Secutron Manual Page 4 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserv er.com

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldser ver.com

3. Hardware Connections

The FieldServer is connected to the panels as shown below.

Configure the panels according to manufacturer’s instructions.

Connector Pinouts

RJ-45 Pin

From RJ-45 To Secutron

1 Brown Tx

8 White/Orange

Rx

5 Blue/white GND

Contents

Main Driver Manual (Supplement to the FieldServer Instruction Manual) FS-8700-72 Secutron Modul-R TABLE OF CONTENTS 1. Secutron Modul-R driver Description 2. Driver Scope of Supply 2.1. Supplied by FieldServer Technologies for this driver 3. Hardware Connections 4. Configuring the FieldServer as a Secutron Modul-R driver Client 4.1. Data Arrays/Descriptors 4.2. Client Side Connection Descriptors 4.3. Client Side Node Descriptors 4.4. Client Side Map Descriptors 4.4.1. FieldServer Specific Map Descriptor Parameters 4.4.2. Driver Specific Map Descriptor Parameters 4.4.3. Timing Parameters 4.4.4. Map Descriptor Example. 5. Configuring the FieldServer as a Secutron Modul-R driver Server 5.1. Data Arrays 5.2. Server Side Connection Descriptors 5.3. Server Side Node Descriptors 5.4. Server Side Map Descriptors 5.4.1. FieldServer Specific Map Descriptor Parameters 5.4.2. Driver Specific Map Descriptor Parameters 5.4.3. Map Descriptor Example. Appendix A. Advanced Topics Appendix A.1. Event Function or Condition Codes A Appendix A.2. Panel Circuit or Zone numbers Appendix A.3. Panel Power-up, Restarts and Resets Appendix A.4. Driver Messages, Error Messages and Optional Map Descriptors