Power On/Off
1.The POWER CORD is shipped as two pieces.
Connect the two pieces, plug the end with wall outlet prongs into an electrical outlet, and the round end into the POWER JACK located at the back of your AirTamer®.
2.Press the POWER BUTTON to turn the unit on. The POWER BUTTON will illuminate when on.
Fan Speed
Your unit will initially start at the highest speed – Speed 5. Select your desired fan speed by pressing the corresponding SPEED BUTTON. Your AirTamer® has five (5) SPEED SETTINGS 1, 2, 3, 4, and 5.
SPEED 5
will provide the highest rate of cleaning performance, but more noise.
SPEED 1
will provide the least amount of noise, but a slower rate of cleaning. Normally, the lower speeds are ideal for sleep or relaxation environments.
Auto Off/Delay On Timer
You can run your AirTamer® continuously, or set it to TURN OFF automatically in 2, 4, 6, 8 or 12 hours. You can also set your AirTamer® to TURN ON automatically in 2, 4, 6, 8 or 12 hours.
Please see the following directions.
Using the Auto Off Timer
The AUTO OFF feature automatically shuts your unit off after 2, 4, 6, 8, or 12 hours. To use the AUTO OFF feature, follow these steps:
1.Press the POWER BUTTON to turn the unit on if not on already.
2.Press the AUTO OFF BUTTON. The AUTO OFF BUTTON and 2 TIMER BUTTON will illuminate.
3.Press the TIMER BUTTON for your selected delay on time: 2, 4, 6, 8 or 12 hours later.
4.Select your speed level.
makes life better! | Page 9 |
