Replacing the Filter
Please follow these steps to replace your AirTamer®
AIR FILTER.
1.Turn the AirTamer® off by pressing the POWER BUTTON and unplugging the unit from the electrical outlet.
2.Remove the AIR EXIT GRILL by pushing down on the AIR EXIT GRILL TABS (2a) and pulling the AIR EXIT GRILL (2b) away from the unit.
3.Remove the AIR FILTER by firmly gripping the sides of the AIR FILTER and pulling the AIR FILTER out of the unit.
4.Mark the suggested month of AIR FILTER replacement on the new AIR FILTER by checking off the appropriate month (e.g. If it is suggested that the AIR FILTER be replaced in twelve (12) months and you install the AIR FILTER on January 1st, put a check in the box beside the letter representing the month to replace – in this case January, for the next January.).
5.Insert the new AIR FILTER by placing the bottom of the AIR FILTER inside your AirTamer® and pushing it past the large front rubber tab. Then push the top of the AIR FILTER past the large front rubber tab at the top of the unit.
Note:
Make sure that the AIR FLOW ARROWS face towards the front of the unit.
6.Replace the AIR EXIT GRILL.
7.Press and hold down the CHANGE FILTER LIGHT BUTTON for three (3) seconds to reset the CHANGE FILTER memory.
2a
2b
3
5
6
7
makes life better! | Page 13 |
