FilterStream HW_A710 Resetting the Change Filter Light, Model, Replace After, Filter Frame

IMPORTANT:

There are different grades and types of AirTamer® AIR FILTERS and the estimated replacement time varies from one type to another.

Please look at your AIR FILTER frame for the recommended time to replace. The following is a quick summary:

Model	Replace After
AF2-1620E	6 Months
AirTamer® High Performance Electrostatic Pleated Filter	(Normal Use)
AF2-1620M	12 Months
AirTamer® Ultra High Performance Pleated Filter	(Normal Use)
AF-1620AM	3 Months
AirTamer® Germ-Odor-Virus Protection Air Filter	(Normal Use)

If you are using an AIR FILTER with a twelve (12) month life, like the AF2- 1620M Ultra High Performance Pleated Filter included with your A710 AirTamer, simply use the AIR FILTER for two (2) – CHANGE FILTER LIGHT cycles (i.e. use the FILTER for six (6) months, reset the CHANGE FILTER LIGHT, then use the FILTER for another six (6) months). You can mark the date to change the FILTER by checking off the corresponding box on the

FILTER FRAME.

Note:

For filters with a 3 month life, mark the date to change the FILTER by checking the corresponding box on the FILTER FRAME.

Resetting the Change Filter Light

To reset the orange CHANGE FILTER LIGHT to the beginning of its 6 month timer:

1.Press and hold the FILTER BUTTON for three (3) seconds.

2.All of the lights on the unit will flash once and the filter light will be reset. It will change back to orange after six (6) months of use.

Page 12 AirTamer®