FilterStream HW_A710 instruction manual Air Filter Frame, Replace the AIR EXIT GRILL

6.If you want to use the included GERM-ODOR- VIRUS PROTECTION FILTER, attach it to the AIR FILTER as follows:

A. Stick the enclosed hook and loop strips (4 included) to the BACK corners of the

AIR FILTER FRAME .

B. Push the GERM-ODOR-VIRUS PROTECTION FILTER against the hook and loop strips.

NOTE:

Make sure GERM-ODOR-VIRUS PROTECTION FILTER is on the back of the main filter and placed closest to the fans.

7.Insert the AIR FILTER by placing the bottom of the AIR FILTER inside your AirTamer and pushing it past the large front rubber tab. Then push the top of the AIR FILTER past the large front rubber tab at the top of the unit.

NOTE:

Make sure that the AIR FLOW ARROWS on the filter face towards the front of the unit.

8.Replace the AIR EXIT GRILL.

9.Place the unit on a level floor, keeping it at least 4” (10.2 cm) away from any wall, furniture or appliances. Position the unit so that the clean air will flow to your desired area (clean air flows from the front of the unit). Ensure that the AIR INTAKE GRILL

and AIR EXIT GRILL are not blocked.

6 B

A

7

8

Page 8 AirTamer®