4 4 Optional Equipment (for qualified installers only)
3Follow the directions below to replace the orifices.
a
Front Orifice
b
Slide the air shutters all the way to the left.
Rear Orifice
Manifold
c
Use a 1/2” open end wrench to unscrew both orifices.
Apply thread sealant to the LP orifices prior to installation. Use the chart below to identify the correct orifices.
1/2" Wrench
Front Burner
Orifice
Rear Burner
Orifice
Look here for the orifice identification
LP NG
Front #55 #46
Rear #54 #43
Manifold
5/16”
d
Screw the LP orifice in so the orifice shoulder protrudes 5/16” (indicating full insertion).
4Remove the pilot orifice following the instructions below. Replace with the propane pilot orifice
aLift the pilot hood off the pilot
assembly.
cRemove the orifice and replace with the LP orifice. Screw the orifice all the way in and replace the pilot hood.
Orifice Identification:
bUse a hex wrench to
unscrew the orifice.
5/32" Hex
NOTE: when
35
LP (Propane) Orifice
35
NG (Natural Gas) Orifice
62
Travis Industries | 4040708 | 1 0 0 - 0 1 1 6 0 |