Firex FADCQ manual Compliance/Proper Applications, Proper Use/Operation

•This combination alarm may be interconnected with as many as 11 other Firex model FADCQ FADC, TPCI, AD, ADC, PAD, G, GC, PG40, or FX1218 smoke alarms, and as many as 6 Firex model ADH heat alarms or COQ-8 CO alarms for a total of not more than 18 interconnected devices.

•Do not connect this combination smoke-CO alarm to any other type of alarm or auxiliary device other than Firex models FADCQ FADC, TPCI, AD, ADC, PAD, G, GC, PG40, or FX1218 smoke alarms, ADH heat alarms or COQ-8 CO alarms.

•You may use the multiple station interconnect- ed features of your FADCQ, even if powered only by a battery. We recommend that you check with your local code enforcement bureau before mixing interconnected alarm devices that may be normally operating both with and without AC power.

•This alarm can share the interconnect wire of smoke and heat alarms. The alarm will auto- matically sound a smoke alarm signal if smoke is detected by this unit or any other intercon- nected smoke alarm, even if the unit is already detecting carbon monoxide and sounding the carbon monoxide alarm signal.

WARNING

•DO NOT connect this combination alarm to any other type of smoke or combination alarm or auxiliary device, except those listed in this manual.

•While AC and AC/DC smoke alarms can be interconnected, ONLY when AC power is ACTIVE will ALL units ALARM when one unit senses smoke. WHEN AC power is DISCON-

NECTED, INTERRUPTED OR NOT PRESENT

FOR ANY REASON, ONLY AC/DC UNITS WILL CONTINUE TO SEND AND RECEIVE SIGNALS AND SOUND AN ALARM IN RESPONSE TO THE PRESENCE OF SMOKE. WHEN power is

DISCONNECTED, INTERRUPTED OR NOT PRESENT FOR ANY REASON, AC powered smoke alarms WILL NOT OPERATE. Models G, GC, and PG40 are AC-only smoke alarms!

Compliance/Proper Applications

•This combination alarm is designed to be used inside a single-family household. In multi-fami- ly buildings, each individual living unit should have its own smoke alarms. It is not a substi- tute for a complete commercial alarm system. It should be used only as supplemental pro- tection in hotels, motels, dormitories, hospi- tals, nursing homes, or group homes.

•This product is intended for use in ordinary indoor locations of family living units. It is not designed to measure compliance with Occupational Safety and Health Administration (OSHA) commercial or industrial standards.

Proper Use/Operation

•The Smart Button accurately tests all smoke and CO alarm functions. DO NOT use any other test method. Test smoke alarm weekly to ensure proper operation.

•This combination smoke-CO alarm is designed to detect smoke and carbon monoxide gas.

It is NOT designed to detect any other type of gas. If this combination smoke-CO alarm sounds its alarm horn, DO NOT assume that it is a false alarm. The alarm horn requires your immediate action.

27