
Fault Codes
| This section describes the fault codes that are displayed on the UI |
| screen and refer you to the DocuColor 3535 User Guide for |
| information. If the fault code is not specified in the table, refer to |
| the information with fault code |
| instructions. |
|
|
Fault Code | Cause/Remedy |
|
|
• Cause - An illegal print feature combination was set. | |
| • Remedy - Check the print data. |
|
|
• Cause - The paper size in the Tray selected by Auto Tray Switching is different | |
| from the paper in the Tray selected in Tray Selection. |
| • Remedy - Change the paper size for the Tray, or change the paper type |
| priority setting. |
|
|
• Cause - The Reduce/Enlarge ratio exceeds the setting range when the | |
| scanned document is enlarged/reduced to the specified paper size. |
| • Remedy - Enter the Reduce/Enlarge ratio, or change the paper size. |
|
|
• Cause - The scanned document is a | |
| • Remedy - See the section entitled Illegal Copies in the front section of the |
| DocuColor 3535 User Guide to check the types of documents that can be |
| copied. |
|
|
• Cause - The SMB host name has been set twice. | |
| • Remedy - Change the host name. |
|
|
• Cause - The IP address has been set twice. | |
| • Remedy - Change the IP address. |
|
|
• Cause - Failed to acquire the IP address from the DHCP server. | |
| • Remedy - Set the IP address manually. |
|
|
• Cause - Could not acquire the IP address from DNS. | |
| • Remedy - Confirm the DNS settings and IP address acquisition method |
| setting. |
|
|
• Cause - An attempt was made to print a job template while it was being | |
| updated. |
| • Remedy - Wait a while before instructing printing again. |
|
|
• Cause - An error occurred during reading of data from the job template pool | |
| server. |
| • Remedy - Check the access rights of the directory to which the job template is |
| stored. |
|
|
Xerox DocuColor 3535 Printer/Copier | 7 – 21 |