Xerox 3535 manual Programming Paper Supply for Tray 5 Bypass

Programming Paper Supply for Tray 5 (Bypass)

1

2

3

You must select the paper size and paper type when loading paper into Tray 5 (Bypass). Auto Size Detect can be used with standard size paper.

On the Basic Copying tab select More… under Paper Supply.

Select Tray 5 (Bypass) to display the Tray 5 (Bypass) screen.

Perform one of the following to select Paper Size:

•Select Auto Size Detect.

•Select Standard Size.

•Select the paper size from the list. Use the up and down arrows to see more selections.

•Select Non-standard Size and enter in the X (width) and Y (length) dimensions by using the arrows.

•Press the left or right arrows to decrease or increase the X dimension (140-483mm or 5.5-19.0 inches).

•Press the up or down arrows to increase or decrease the Y dimension (100-305mm or 3.9-12.0 inches).

Xerox DocuColor 3535 Printer/Copier 1 – 29