Border Erase
The Border Erase feature enables you to eliminate unwanted marks near the edges of the original from the output copy. The range for Border Erase is 0 through 50mm (0.0 through 2.0 inches) in 1mm (0.1 inch) increments.
Border Erase options can be used individually or combined together:
Top & Bottom For Normal the default is 2mm (0.1 inch). For Variable Erase the default is 5mm (0.2 inch).
Left & Right For Normal the default is 2mm (0.1 inch). For Variable Erase the default is 5mm (0.2 inch).
Center The default is 0mm (0 inches).
The selected settings are applied to both sides of
When the image is reduced or enlarged, the selected percentage will be applied to the Border Erase.
When making copies the copier adds a margin of 2mm (0.1 inch) to all sides. This cannot be eliminated.
Xerox DocuColor 3535 Printer/Copier | 1 – 41 |
