Xerox 3535 manual SRGB output

Contrast Level Set the default density assigned to Lower ~ Higher for Contrast in Lighter/Darker/Contrast on the Image Quality screen. Contrast Settings are not enabled when Output Color is set to Black. Set the density between -100 ~ +100 in increments of 1.

Lower ~ Slightly Lower must be set between -100 and -1, and Slightly Higher ~ Higher must be set between +1 ~ +100. Standard, 0, cannot be changed. Set so that the values increase from Lower to Higher.

Select Contrast using the up and down arrow buttons on the left, and set the values using the up and down arrow buttons on the right. The defaults from the top are, -50, -25, 0, 25, 50.

Color Space Set the default for Color Space.

Enter the setting on the Numeric Keypad using the numbers listed in the following table. The default is 0, sRGB.

Setting		Description
0		sRGB output
1		Output by device RGB. This limits the file
		format to TIFF (with ICC profile). Profiles are
		used to enable output at tones close to those
		of the machine.
	NOTE: You can find profile data on the Driver CD.

Xerox DocuColor 3535 Printer/Copier 4 – 55