Paper Trays
Trays 1,2,3 and 4 are located at the lower front of the printer/ copier. Tray 5 (Bypass) is located on the left side of the printer/ copier.
There are two possible tray configurations on the DocuColor 3535.
Option 1 is a
3-Tray Module
Trays 1 - 4 The
Tandem Tray Module
The Tandem Tray Module consists of 4 paper trays.
With the Tandem Tray Module:
Trays 1 and 2 Adjustable from 5.5x8.5 in. through 11x17 in. (A5 through A3), and can each accommodate up to 520 sheets based on paper weight.
Trays 3 and 4 High capacity paper trays accommodating a total of 2080 sheets,
(8.5x11 in., A4, and B5) based on paper weight.
All Tray Modules
Trays 1 - 4 can feed Transparencies and paper weights 18 lb. to 110 lb. (64 to 220 gsm). The machine automatically detects the size and orientation of loaded paper. The paper type must be set in System Setting mode.
Trays 1 - 4 can accommodate approximately 300 striped transparencies and approximately 450 stripeless transparencies. Both striped and stripeless transparencies can be used, but stripeless transparencies are recommended. It is not recommended that you output more than 20 transparencies at a time. If your job is larger than 20 pages, use the Transparency Separators feature.
NOTE: Transparencies cannot be delivered to the Finisher (optional accessory). Transparencies cannot be used for 2 Sided output.
NOTE: When making copies you can select Transparencies from Tray 5 (Bypass). If you want to select Transparencies from Trays
For more information on selecting paper type, refer to the Machine
Administrator chapter.
Xerox DocuColor 3535 Printer/Copier | 1 |
