Loading SRA3 Paper into Tray 5 (Bypass)
1 Open Tray 5 (Bypass) by grasping the tray and gently pushing it away and down from the printer/copier.
2 Adjust the front edge paper guide to the closest position forward beyond the 12 inch position.
3 Load the SRA3 paper into Tray 5 (Bypass). Load the paper with the side to be printed on facing down.
4 Adjust the back edge guide until it lightly touches the paper.
NOTE: You can select SRA3 paper as one of the default paper sizes for Tray 5 (Bypass). Performance using this paper size may vary. The maximum image area is 302 x 476.6mm with a guaranteed area of 297 x 476.6mm.
CAUTION: Do not place any objects or materials other than the appropriate stock on Tray 5 (Bypass). Printer/copier damage may occur.
Xerox DocuColor 3535 Printer/Copier | 5– 11 |
