Firex SERIES 10000 specifications Testing and Maintenance, Warranty Information

Models: SERIES 10000

1 8
Download 8 pages 22.28 Kb
Page 8
Image 8

TESTING AND MAINTENANCE

Testing

Stand-alone units: Test each alarm regularly to be sure it is operating properly.

Interconnected units: Test each alarm in an interconnected system regularly.

The Smart Button accurately tests all functions. DO NOT use an open flame to test this CO alarm. You may ignite and damage the smoke alarm or your home.

Test alarms weekly and upon returning from vacation or when no one has been in the household for several days.

IMPORTANT! Refer to “Understanding the Alarm LEDs and Horn Patterns” chart so you understand how to tell if your alarm is operating properly.

Maintenance and Care

DANGER

ELECTRICAL SHOCK HAZARD. Turn off power at main service panel by removing fuse or switching appropriate circuit breaker to OFF position BEFORE cleaning CO alarm or replacing the battery.

Cleaning

IMPORTANT: Do not attempt to remove the cover or clean inside the alarm.

THIS WILL VOID YOUR WARRANTY.

Clean the cover at least once a month using the soft brush or wand attachment to a vacuum cleaner. Be sure all the vents are free of debris. If necessary, use a damp cloth to clean residual dirt. Do not use abrasive cleansers or spray the alarm with cleaning agents or waxes, especially cleaners containing ammonia. These liquids may impair the performance of sensors. Do not submerge the alarm in water.

Replacing the Battery (Model COE and COE-B)

Replace the battery at least once a year or immediately when the low battery warning activates. If a replacement battery is not immediately available, push the Smart Button to silence the Low Battery Warning for approximately 10 hours. If alarm does not silence, replace the battery immediately.

WARNING

Use only Eveready 522, Duracell MN 1604 or Ultralife U9VL-J batteries! DO NOT USE ANY OTHER TYPE OF BATTERY. DO NOT USE RECHARGEABLE BATTER- IES. Refer to the Installation section if you are not familiar with the proper way to install a new battery.

WARRANTY INFORMATION

5-YEAR LIMITED CO ALARM WARRANTY

Invensys Controls Americas warrants to the original consumer purchaser each new CO alarm to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase. Invensys Controls Americas agrees to repair or replace, at its option, any defective CO alarm provided it is returned with postage prepaid and with proof of purchase date to Invensys Controls Americas. This warranty does not cover damage resulting from accident, misuse or abuse or lack of reasonable care of the product. This warranty is in lieu of all other express warranties, obligations or liabilities. THE IMPLIED WAR-

RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO A PERIOD OF FIVE (5) YEARS FROM THE DATE OF PURCHASE FOR THE CO ALARM. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO CASE SHALL INVENSYS CONTROLS AMERICAS BE LIABLE FOR ANY INCIDENTAL OR CON- SEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY ITS NEGLIGENCE OR FAULT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other legal rights which vary from state to state. This product meets all the requirements of U.L. Standard 2034.

Where to send your alarm for service

Not attempt to repair this combination alarm. Doing so will void your warranty. If the alarm is not operating properly, see “Troubleshooting.” If you must return an alarm under warranty, send the alarm in a well-padded envelope with postage prepaid, a note describing the nature of the difficulty, and proof of date of purchase to:

In U.S.:

In Canada:

Invensys Controls Americas

Invensys Controls Americas

28C Leigh Fisher Blvd.

Service de réparation

El Paso Texas 79906

3505 Laird Road - Unit #14

United States of America

Mississauga Ontario L5L 5Y7

If the CO alarm is no longer under warranty, have a licensed electrician replace the CO alarm immediately with a comparable Firex brand alarm.

For Technical Support:

Phone: (800) 445-8299

Email: technicalservice@invensys.com

Website: www.icca.invensys.com/firex

Controls Americas

 

191 E. North Avenue

 

Carol Stream Illinois 60188

 

©2006 Invensys Controls Americas

110-1125C

8

Page 8
Image 8
Firex SERIES 10000 specifications Testing and Maintenance, Warranty Information

SERIES 10000 specifications

The Firex SERIES 10000 represents a cutting-edge advancement in fire safety technology, designed to enhance both efficiency and reliability in protecting residential and commercial environments from fire hazards. This innovative series is equipped with a range of features that set it apart in the realm of fire detection and alarm systems.

One of the standout characteristics of the Firex SERIES 10000 is its advanced sensing technology. The system utilizes a dual-sensor mechanism that combines both photoelectric and ionization detection. This hybrid approach ensures comprehensive coverage by being able to detect smoldering and fast-flaming fires, significantly reducing the risk of false alarms while maintaining a rapid response time.

The Firex SERIES 10000 is engineered with smart connectivity features, allowing it to integrate seamlessly with existing home automation systems. Through Wi-Fi connectivity, users can monitor their fire alarm systems remotely via a smartphone application. This feature not only provides real-time notifications about potential threats but also allows users to check the status of their alarms from anywhere, offering peace of mind even when away from home.

Energy efficiency is another key attribute, with the SERIES 10000 designed to consume minimal power while maintaining peak performance. The system employs a low-energy standby mode, ensuring that battery life is prolonged without sacrificing reliability. This design consideration translates to reduced operational costs and environmental benefits.

Moreover, the Firex SERIES 10000 is built with durability in mind, featuring a weather-resistant enclosure suitable for installation even in challenging environments. This durability ensures long-lasting performance, making it an ideal choice for various applications, from residential settings to commercial buildings and industrial facilities.

The user-friendly interface is enhanced with intuitive controls, allowing for easy installation and maintenance. Clear visual indicators and audible alerts facilitate straightforward operation, ensuring that users can quickly understand the system’s status and respond appropriately in case of an emergency.

In summary, the Firex SERIES 10000 is a top-tier fire detection system that combines advanced technology, smart connectivity, energy efficiency, and user-centric design. Its robust features cater to the evolving needs of modern fire safety, making it an indispensable tool in safeguarding lives and properties from fire emergencies.