First Alert FA120C user manual Security Codes, General Duress Code, Quick Arming

General

Duress Code

Ask your installer if "Duress" is active for your system, and if so,

check here: Ê Ê Ê

Quick Arming

Ask your installer if "Quick Arming" is active for your system, and if

so, check here: Ê Ê Ê

SECURITY CODES

At the time of installation, your installer programmed a personal four-digit Master code, known only to you and yours. This code is used to perform most system functions, including arming and disarming of the system. As an additional safety feature, temporary user codes can be assigned (see next page) for use by those not having a need to know the Master code. Note that the Master code remains in effect even when other user codes are assigned.

This feature is intended for use when you are forced to disarm or arm the system under threat. When used, the system will act normally, but can silently notify the central station of your situation, if that service has been provided.

The Duress code is defined as user number 8.

Important: The Duress code is useful only when connected to a central station.

If your system supports "Quick Arming", the "#" key can be pressed in place of the security code when arming the system. The security code is always required, however, when disarming the system.

Ð 1 0 Ð