SUMMARY OF AUDIBLE/VISUAL NOTIFICATIONS
SOUND | CAUSE | DISPLAY | |
LOUD, INTERRUPTED | FIRE ALARM | FIRE and ALARM are displayed; protection zone in alarm is displayed. | |
Keypad & External |
|
| |
LOUD, CONTINUOUS | BURGLARY/AUDIBLE | ALARM is displayed; protection zone in alarm is also displayed. | |
Keypad & External | EMERGENCY ALARM |
| |
|
| ||
|
|
| |
ONE SHORT BEEP | a. SYSTEM DISARM | a. Only READY is displayed. Green READY indicator (if present) is lit. | |
(not repeated) | b. SYSTEM ARMING ATTEMPT | b. NOT READY is displayed, open protection zone number is displayed. | |
Keypad only | |||
WITH AN OPEN ZONE | Green READY indicator (if present) is not lit. | ||
| |||
| c. BYPASS VERIFY | c. The bypassed protection zone numbers are displayed. (One beep for each number | |
|
| displayed.) BYPASS also displayed. | |
|
|
| |
ONE SHORT BEEP | SYSTEM IS IN TEST MODE | Opened Zone identifications will appear. | |
(once every 40 seconds) |
|
| |
Keypad only |
|
| |
|
|
| |
ONE BEEP every 40 sec. | a. LOW BATTERY AT XMTR | a. BAT displayed with ID number of transmitter. | |
Keypad only | b. TROUBLE | b. CHECK displayed. Troubled protection zone is displayed. | |
| |||
TWO SHORT BEEPS | ARM AWAY OR MAXIMUM | AWAY and (if MAXIMUM) INSTANT are displayed. | |
Keypad only |
|
| |
|
|
| |
THREE SHORT BEEPS | a. ARM STAY OR INSTANT | a. STAY and (if INSTANT) INSTANT are displayed. Red ARMED indicator is lit. | |
Keypad only | b. ZONE OPENED WHILE SYS- | b. CHIME displayed. Pressing ✴/ READY key will display opened zone. | |
| TEM IS IN CHIME MODE |
| |
| c. ZONE OPENED WHILE SYS- | c. Open protection zone number is displayed. | |
| TEM IS IN TEST MODE |
| |
RAPID BEEPING | MEMORY OF ALARM | FIRE and/or ALARM is displayed; zone in alarm is displayed. | |
Keypad only |
|
| |
SLOW BEEPING | ENTRY DELAY WARNING | None during delay; Exceeding the delay time without disarming causes alarm. | |
Keypad only |
|
| |
|
|
|
If bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.
N o t e s : ¥ BAT displayed (with no beeping or zone number) indicates system main battery is weak (see page 27).
¥Also see Power Failure, and Other Displays under TROUBLE CONDITIONS on page 27.
Ð 3 4 Ð
