Using the ÊÊ9ÊÊ CHIME Key
This feature can be used only while the burglary system is disarmed.
CHIME MODE
Your system can be set to alert you to the opening of a door or window while it is disarmed by using CHIME mode. When activated, three tones will sound at the keypad whenever a protected door or window is opened. Pressing the READY key will display the open points.
To turn Chime Mode on, enter the security code and press the CHIME key. The CHIME message will appear.
To turn Chime Mode off, enter the security code and press the CHIME key again. The CHIME message will disappear.
Using
Panic Keys
(for manually activating silent and/or audible alarms)
TO INITIATE A PANIC FUNCTION AT ANY TIME OF DAY OR NIGHT:
Press an active lettered key for at least two seconds.
or
Press both keys of an active pair at the same time.
PANIC KEYS
Your system may have been programmed to use special keys or combi- nations of keys to manually activate emergency (panic) functions. The functions that might be programmed are: Silent Emergency, Audible Emergency, Personal Emergency, and Fire.
A silent emergency will send a silent alarm signal to the central station, but there will be no audible alarms or visual displays.
An audible emergency will sound a loud, steady alarm at your keypad(s) and at any external sounders that may be connected (ALARM plus a zone number would also be displayed).
A personal emergency alarm will send an emergency message to the central station (if connected) and will sound at keypad(s), but not at external bells or sirens.
A fire alarm will send a fire alarm message to the central station and will uniquely sound at keypad(s) and external bells and sirens (FIRE plus a zone number would also be displayed).
Ð 2 2 Ð
