First Alert FA120C user manual To Assign, Change or Delete User Codes, Security Codes

To Assign, Change,

or Delete

User Codes

4-DIGIT USER CODES It is recommended that obvious codes such as 1 1 1 1 or 1 2 3 4 not be assigned.

Important:

Temporary users should not be shown how to use any system function they do not need to know (e.g., bypassing protection zones).

SECURITY CODES

1.Enter your Master code and press the CODE key.

2.Enter single-digit User Number (2Ð7) for which a code is to be assigned, changed, or deleted.

3.If assigning or changing a user's code,enter the desired 4-digit code for use by that User Number. The keypad will beep once.

If deleting a user's code,perform steps 1 & 2 and stop. In a few moments the keypad will beep once, indicating that the existing code has been deleted.

To assign your Duress code, do the following:

Enter your [Master code] + [8] + [8] + [desired 4-digit code]. The keypad will beep once.

The Master code can be changed by the main user of the system. To change it, do the following:

Enter your [Master code] + [8] + [1] + [new Master code] + [new Master code] again. The keypad will beep once.

THESE KEYS	{	A		B
NOT PRESENT		C		D
ON ALL
KEYPADS
		OFF	AWAY	STAY
		1	2	3	USE THE CODE
		MAXIMUM	TEST	BYPASS	KEY TO ASSIGN
					OTHER USER
		4	5	6
					CODES
		INSTANT	CODE	CHIME
		7	8	9	“QUICK ARM” KEY
TYPICAL KEYPAD		READY			(IF PROGRAMMED)
		*	0	#

Ð 1 1 Ð