First Alert FA142C SECURITY CODES Continued, To program a Duress code, To change the Duress code

Technical Manuals Online! - http://www.tech-man.com

Duress Code

( C o n t i n u e d )

If a DURESS code is assigned, check here: -

To Change Your Master Code

SECURITY CODES (Continued)

The Duress code may be any 4-digit code assigned to User Number 8.

To program a Duress code:

Enter your Master Code + 8 + 8 + [desired 4-digit duress code]. The keypad will beep once.

Note: The Duress code must differ from the Master Code or any other User’s Code.

To change the Duress code:

Enter the Master Code + 8 + 8 + [new 4-digit duress code].

To delete the Duress code:

Enter the Master Code + 8 + 8, and then stop. When the keypad beeps once it signifies that the code has been deleted.

Enter the original Master code + 8 + 2 + New Master Code + New Master Code again .

The keypad will beep 3 times, indicating acceptance of the new master code.

Quick Arming

Ask your installer if "Quick Arming" is active for your system; if so, check here:

Phone (Voice) Module

Ask your installer if your system includes a phone module; if so, check here:

If your system supports "Quick Arming", the "#" key can be pressed in place of the security code when arming the system. The security code is always required, however, when disarming the system.

If your system includes a phone module, your installer will have programmed a 2-digit phone access code for your system. Be sure to obtain this phone code from your installer.

Complete information regarding the use of this phone access feature is provided in a separate manual entitled PHONE ACCESS USER'S GUIDE, which accompanies the phone module.

– 1 1 –