Technical Manuals Online! - http://www.
FIRE ALARM SYSTEM (IF INSTALLED)
General | Your fire alarm system (if installed) is on 24 hours a day, for continuous protection. In the |
| event of an emergency, the strategically located smoke and heat detectors will au- |
| tomatically send signals to your system, triggering a loud, interrupted pulsed sound* from |
| the Keypad(s). This sound will also be produced by optional exterior sounders. A FIRE |
| message will appear at your Keypad and remain on until you silence the alarm (see below |
| for silencing fire alarms). |
| * Temporal pulse sounding is produced for Fire alarms, as follows: |
| 3 |
| TYPICAL FIRE EMERGENCY DISPLAYS |
tech-
FIRE 05
05
AC
man.com
MASTER BEDROOM
ALPHA
ALARM
F I R E
Silencing 1. | You can silence the alarm at any time by pressing the OFF key (the security code is |
Fire Alarms | not needed to silence fire alarms). To clear the display, enter your code and press the |
| OFF key again (to clear Memory of Alarm). |
2. | If the Keypad's fire indication does not clear after the second OFF sequence, smoke |
| detectors may still be responding to smoke or heat producing objects in their vicinity. |
| Investigate, and should this be the case, eliminate the source of heat or smoke. |
3. | If this does not remedy the problem, there may still be smoke in the detector. Clear it |
| by fanning the detector for about 30 seconds. |
4. | When the problem has been corrected, clear the display by entering your code and |
| pressing the OFF key. |
| – 2 9 – |
