First Alert FA142C Trouble Conditions, Technical Manuals, COMM. FAILURE or FC 2.SYSTEM LO BAT

Technical Manuals

TROUBLE CONDITIONS

Online! - http://www.tech

Other Trouble

Displays

*Any “beeping” that accompanies a trouble display can be stopped by entering an OFF sequence (code +

Words or letters in parentheses (

[

1.COMM. FAILURE (or FC)

2.SYSTEM LO BAT

(or BAT with no zone No.)

) are those that are displayed on Fixed-word keypads.

Indicates that a failure has occurred in the telephone com- munication portion of your system.

CALL FOR SERVICE IMMEDIATELY.

Indicates that a low system battery condition exists. This will be accompanied by a once-per-minute "beeping"* at the Keypad. If this condition persists for more than one day (with AC present), CALL FOR SERVICE.

-man.com

OFF)

**Not all systems use wireless transmitters.

3.LO BAT + zone descriptor (or BAT with zone No.)

4.MODEM COMM (or CC)

Indicates that a low battery condition exists in the wireless transmitter** number displayed. This will be accompanied by a once-per-minute "beeping"* at the Keypad. Either replace the battery yourself, or CALL FOR SERVICE. If the battery is not replaced within 30 days, a CHECK display may occur.

Some wireless sensors contain a non-replaceable long-life battery which requires replacement of the entire unit at the end of battery life (e.g., 5802 Pendant and 5802CP Belt Clip Personal Emergency Transmitters).

Indicates that the control is on-line with the central station's remote computer. The control will not operate while on- line. Wait a few minutes. The display should disappear.

– 2 7 –