Fisher 444 Alphaline PHYSICAL

Rosemount Model 444 Alphaline Temperature Transmitters

5-4

PHYSICAL

SPECIFICATIONS

Materials of Construction

Electronics Housing

Low-copper aluminum. (NEMA 4X). IP 54, IP 65, IP 66.

Housing Paint

Polyurethane.

Housing O-rings

Buna-N.

Sensor and Conduit Connections

1/2-inch conduit on electronics housing. Screw terminals and integral test jacks

compatible with miniature banana plugs (Pomona 2944, 3690 or equal).

Weight

Transmitter: 3 lb (1.4 kg).

Transmitter with mounting bracket: 4 lb (1.8 kg).

Hazardous Location Certifications

Factory Mutual (FM) Approvals

E5 Explosion Proof: Class I, Division 1, Groups B, C, and D. Dust Ignition

Proof: Class II, Division 1, Groups E, F, and G; Class III, Division 1

hazardous locations. Indoor and outdoo r use. NEMA Enclosure Type 4X.

Refer to Factory Mutual Explosion Proof Drawing 00444-0261.

I5 Intrinsic Safety: Class I, Division 1, Groups A, B, C, and D; Class II,

Division 1, Groups E, F, and G; Class III, Division 1 hazardous locations;

Intrinsically safe system only when applying Table 5-1 entity parameters.

Nonincendive: Class I, Division 2, Groups A, B, C, and D; Indoor and

outdoor use. NEMA Enclosure Type 4X.

Refer to Factory Mutual Intrinsic Safety Drawing 01151-0214.

K5 Combination of E5 and I5.

TABL E 5-1 . F M Ent ity

Parameters.

Canadian Standards Association (CSA) Approvals

E6 Explosion Proof: Class I, Division 1, Groups C and D; Dust-ignitionproof

Class II, Division 1, Groups E, F, and G; Class III, Division 1 hazardous

locations; Suitable for Class I, Division 2, Groups A, B, C, and D; CSA

Enclosure Type 4X.

I6 Intrinsic Safety: Class I, Division 1, Groups A, B, C, and D. Intrinsically

safe system only when applying Table 5-2 parametric parameters.

Temperature code T2D. CSA Enclosure Type 4X.

Refer to CSA Intrinsic Safety Drawing 00444-0034.

C6 Combination of E6 and I6.

Model 444

Parameters

Associated

Equipment

Parameters

FM Approvedfor

Class I, II, III,

Division 1, Groups

A B CthruG

VMAX =40 V

IMAX=165mA

Ci= 0.044µF

Li=0

VOC orVT ≤ 40 V

ISC orIT ≤ 165 mA

CA>0.044µF

LA>0

•• •

VMAX =40V

IMAX= 225 mA

Ci= 0.044µF

Li=0

VOC orVT ≤ 40 V

ISC orIT ≤ 225 mA

CA> 0.044µF

LA>0

NA NA •

Contents

Main Page Product Manual 7:00 a.m. to 7:00 p.m. CST) 24 hours a day IncludesCanada) NOTICE 1 Model 444 Alphaline Temperature Transmitters Page Table of Contents SECTION 1 Introduction SECTION 2 SECTION 3 Calibration Page 1Introduction OVERVIEW Page 2Installation OVERVIEW GENERAL MECHANICAL Mounting Stability Access Requirements 2-3 FIGURE2-1. Recommended Process Mounting. FIGURE2-2. Recommended Process Mountingwith Drain Seal. ELECTRICAL Power Supply Field Wiring 2-5 FIGURE 2-4. Field Wiring for the Standard Model 444 Transmitters. { FIGURE 2-5. Field Wiring for Low-Power Model 444 Transmitters (444LL and LM). Sensor Connections 2-6 FIGURE 2-7. Characteristicsof Thermocouple and RTD Input Wires. FIGURE 2-6.Sensor Wiring Diagrams. Grounding Multi-Channel Installations Surges/Transients ENVIRONMENTAL Temp era tur e Environment 2-9 FIGURE 2-9. Model444 Transmitter Housing TemperatureRise. FIGURE 2-10.Sensor AssemblyDimensional Drawings. Moist or Corrosive Environments HazardousLocation Intrinsically Safe PROCEDURE Mechanical Electrical Page 2-13 FIGURE 2-11.Model 444 with Optional Mounting Bracket. FIGURE 2-12.Model 444 Dimensional Drawings PIPESTAND MOUNTING PANEL OR SURFACE MOUNTING Page 3Calibration OVERVIEW SAFETY MESSAGES RTD TRANSMITTER Page 3-4 THERMOCOUPLE TRANSMITTER Using a Compensated Thermocouple Simulator + 3-6 U s i n ga nI c e B a t h LOW-POWER TRANSMITTER Page Page 4Maintenance and Troubleshooting OVERVIEW HARDWARE DIAGNOSTICS TROUBLESHOOTING 4-2 TABLE4-1. Transmitter TroubleshootingSymptoms andCorrectiveActions. Symptom PotentialSource CorrectiveAction REPAIR Disassembly Procedure Reassembly Procedure Interchangeability of Parts Burnout Protection Adjustments REPAIR AND WARRANTY SERVICE RETURN OF MATERIALS 5Specifications and Reference Data FUNCTIONAL Page PERFORMANCE PHYSICAL Page Page LCD METER (OPTIONS D AND E) Functional Specifications Performance Specifications Physical Specification Page 5-9 TABLE5-3. 444 Model Structure. TypicalModel Number: 0444 RL3 U 1 A 2 E5 Q4 Model Product Description Code Input Type(1) 5-10 TABLE5-4. 444RL Fast Turn-on Model Structure. 5-11 TABLE5-5. 444LL, LM Model Structure. TABLE5-6. Meter Kits. Model ProductDescription Code Input Type j 5-13 TABLE5-8. Parts List forModel W444 Transmitter (CESI/CENELEC Approval). j 5-14 TABLE5-9. Parts List forModel T444 Transmitter (BASEEFAApproval). 5-15 TABLE5-10. Parts List for Model 444 RL Fast Turn On Transmitter(RTD Input). TABLE5-11. Parts List for Model 444 LL, 444 LM Low PowerTransmitter (RTD Input). j 5-16 TABLE5-12. Parts List for Model 444 Increased Accuracy or Special Range Transmitters. Code D Not used on transmitters,but recommended for repair activities. Page Page 6Options MOUNTING BRACKET LCD / ANALOG METER LCD METER Configuration Page LCD Meter Assembly LCD Meter Page ANALOG METER } Analog Meter Page Page Page Page Page Page Appendix B-1 BTemperature Sensor Reference Information TABLEB-1. Resistance VersusTemperature Curve Ro=100.00,a=0.00385 Reference Standard IEC 751. Page I-1 Index A B C D S T U V W Page Page Rosemount Inc. http://www.rosemount.com Fisher-Rosemount Limited Fisher-Rosemount 00809-0100-4263z 00809-0100-4263, Rev. AA